Groupe électrogène gaz Caterpillar CG170-20 2MW neuf
Hörschingà 7279 km de vous
Si vous décidez d'acheter un véhicule ou du matériel à bas prix, assurez-vous que vous communiquez avec un vendeur réel. Cherchez autant d'informations sur le propriétaire que possible. Un escroc peut se faire passer pour une société réelle. En cas de doute, contactez-nous en utilisant le formulaire de commentaires afin que nous effectuions un contrôle supplémentaire.
Avant d'effectuer un achat, étudiez attentivement plusieurs offres de vente afin de connaître le coût moyen du modèle de véhicule ou d'équipement que vous avez choisi. Si le prix de l'offre qui vous intéresse est très inférieur aux offres similaires, réfléchissez bien. Une différence de prix considérable peut indiquer la présence de défauts cachés ou une tentative d'escroquerie.
N'achetez pas de produits dont le prix est trop différent du prix moyen de produits similaires.
Ne consentez pas à payer une caution ou une avance douteuse. En cas de doute, n’hésitez pas à demander des précisions, des photos et des documents supplémentaires, vérifier l'authenticité des documents ou encore poser des questions.
C'est l'arnaque la plus répandue. Des vendeurs malhonnêtes peuvent demander une avance sur le montant total pour « réserver » votre achat. De cette manière, ils peuvent recueillir un montant considérable, puis disparaître.
- Faire un prépaiement sur la carte
- N'effectuez pas de prépaiement sans établir de documents confirmant le transfert d'argent si le vendeur vous semble suspect au cours de vos échanges.
- Transfert de l'argent sur le compte séquestre
- Méfiez-vous de ce genre de demandes, il est très probable que vous soyez en train de communiquer avec un fraudeur.
- Virement sur le compte d'une société avec un nom similaire
- Soyez vigilant(e), des fraudeurs peuvent se faire passer pour des entreprises connues en introduisant des modifications mineures dans le nom. Ne transférez pas d'argent en cas de doute sur le nom de l'entreprise.
- Substitution de ses propres coordonnées dans la facture d'une entreprise réelle
- Avant d'effectuer le virement, vérifiez que les coordonnées indiquées sont exactes et qu'elles appartiennent à l'entreprise indiquée.
Coordonnées du vendeur
+358 50 53...
Montrer
+358 50 5345498
+358 9 231...
Montrer
+358 9 23165797
Autriche 
50 Hz
Autriche, Hörsching
Autriche, Hörsching
50 Hz
Allemagne, Bergisch-Gladbach
50 Hz
Allemagne, Bergisch-Gladbach
50 Hz
Allemagne, Bergisch-Gladbach
50 Hz
Allemagne, Bergisch-Gladbach
Pièces détachées pour groupe électrogène
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline afficher les coordonnées/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation